We are offering Validation of Clean room and undertake contamination control, clean room protocols and maintenance of clean rooms tailored as per client?s requirements. Some of our validations are mentioned below:
- Validation of laminar flow devices to current standards
- Validation of safety cabinets to BS EN 12469 : 2000 including containment using KI-discus equipment
- Testing of fume cupboards to COSHH & BS 7258:1994, BS 7989 : 2001 including containment and gaseous phase testing
- Testing of isolators to all current standards and recommended practices
We are available with Sampling Booth or Dispensing Booth that is dimensionally accurate and precision engineered. The unit eliminates powder contamination to protect the operator and the surrounding environment. Our team of quality controllers takes intensive care in assuring that the best range reaches our clients.
We are offering industrial dryers, tray dryers, pharmaceutical tray dryers :
•Triple walled in construction.
•Exterior made of S.S. LM-304 grade [18 swg.] constructed on thick S.S. LM-304 angle framework.
•Pre-heating chamber & inner chamber made of stainless steel[20 swg./18 swg.]
•Gap between the walls filled with initial layer of asbestos sheets followed by a dense layer of high quality low thermal mass glass wool insulation.
•Provision for forced air circulation using motorized blower.
•Provided with control panel for monitoring temperature.
•Installed with a microprocessor based PID Digital Temperature indicating controller with built-in timer
•Digital high temperature safety Cut-off incorporated within the unit.
•Superior quality contact or for cutting/ restoring power to the heaters are incorporated.
•Doors provided with safety cut-out system disables the motor & the heaters when doors are opened in operational mode.
•Control panel with suitable neon lamps for indication of mains On/Off. Heater On/Off etc.
•24/48/96 & 192 trays tray drier supplied with heavy duty(16 swg.) S.S. LM-304 Pipe trolley’s But without trays.
•Unit works on either 230 V AC, 50 Hz. Or 440 V AC 3 phase supply. - Temperature range : Up to 1500c.
We bring forth a unique range of Laminar Air Flow Benches for our clients. These products are manufactured using high quality stainless steel and advance technology. Our range is fitted with washable synthetic pre-filter units and high efficiency air filters.
Laminar Airflow Bench
Ceiling Suspended Laminar Flow
We are offering pass box :
- Clean room dynamic pass Box/ Pass box
*Description : It is used for transfer of material from one area to another with isolation by means of mechanical/ electromagnetic door interlocking, which ensures opening of only one door at a time. Thus avoiding cross contamination between two area's.
*Construction : These units are factory assembled and are made up of S.S. 304 grade stainless steel material. These units have smooth welded corners.
*Installation : Pass-through chambers can be installed in a number of ways, depending on the wall or door that will support them.
Assisted by our team of efficient personnel, we make bio-safety cabinets to our customers. Our bio safety cabinets are essential when the user is working with potentially infectious bio hazardous agents, bacteria and viruses. These cabinets are designed and manufactured to provide a work area that is completely bathed in high efficiency perfect air, which is free from any kind of particulate contamination.
We are leading manufacturer of Clean Room and Air-conditioning Equipments. Air Micron offer double Skin and single Skin Air Handling units that are developed and power with innovative technology to provide customer satisfaction. Air Micron are also design and execution of central air conditioning for Pharma company, cleanroom, hospital, call centre, shopping mall, office building, hotel, school, R& D centre and many more.
Capacity------ 400 CFM to 50000 CFM
Static Pressure---- 25 mm to 150 mm of Wg
MOC-- Inner Skin-. 6 mm Thick Pre coated Outer Skin 0. 6 MM thick GI Plain
Panel----- Thickness 25 mm and 50 mm thick Infill Between Panel Sandwich construction with CFC Free PUF Insulation Frame----- Work Extruded aluminum profile with nylon fitting
Base----- Frame GSS Frame
Coil----- 4 / 6 / 8 / 2 Row Copper Tube with aluminum fins
Motor---- Crompton, ABB/siemens Make 3 Phase Motor
Fan ------- Forward and Backward Fan imported Fan
Filters----- 50 M thck pre filter/300mm fine and HEPA filter
We are able to attain complete client satisfaction by offering a wide range of Pass Boxes & Fume Hoods. These are intricately designed in several sizes depending upon the containment level. Our collection is checked on various parameters to ensure reliable performance, efficiency and durability.
Offering SS Pass Boxes:
It is used for transfer of material from one area to another with isolation by means of Mechanical / Electromagnetic door interlocking, which ensures opening of only one door at a time. Thus avoiding cross contamination between two area's.
These units are factory assembled and are made up of S. S. 304 grade Stainless Steel material. These units have smooth welded corners.
Pass-Through Chambers can be installed in a number of ways, depending on the wall or door that will support them.
Operation Theater Modular OT is a finished steel structure with joint less sterile coating providing a high quality finish. Pre-fabricated modular OT offer the advantage of speedy construction, high quality finish in prevention of contamination build up, long durability, robust and flexibility design for future expansion, ease of maintenance etc
Pre-Fabricated Modular OT
Digital X-Ray Viewing Screens
OT Control Panel
OT Storage Unit
Our range of Clean Room Systems & Equipments include Validation of Cleanroom, HEPA Filter, HVAC & Clean Room System & Solution. Clean-Rooms & Filters is highly available with best quality on effective cost.
Validation Of Cleanroom
HVAC & Clean Room System & Solution
We are the noted manufacturers and suppliers of a comprehensive range of Garment Cubicle. This product is widely appreciated for its unmatched ability of providing sterility to our clients aprons and also for preventing accumulation of dust and other harmful particles on clean room garments when not in use.
Garment Storage Cabinet
We manufacture and supply a wide range of Modular Cubicles & Rooms Owing to the use of superior grade material in manufacturing process, the offered products are durable in nature and strong. Owing to these features, the furniture offered by us lasts longer.
Modular Clean Room
Modular Clean Room Panel
We offer precision engineered Air Handling Units in various designs and capacities. Our products can be custom configured as per the specifications given by the clients. These units have modular design offering both sturdy construction and flexible combination of components to suit applications. These Air Handling Units are widely used in different industries and commercial sectors.
Air Handling Unit & Ventilation
Offering Air Handling Unit AHU.
Air micron is a company having a firm belief to provide best quality air treatment products to meet the requirements of HVAC system designers to cater to the ever changing needs of air conditioning industry, AMC has started manufacturing top of the line double skin air handling units ranging from 1200 cfm to 102000 cfm. Double skin air handling units being manufactured by AMC incorporate state of the art features & latest manufacturing techniques.
Available in various sizes, floor mounted. Ceiling suspended & vertical floor mounted A.H.U’s from different viable proposition to solve designer’s hindrance. Manually operated / motorized fresh air and return air dampers for mixing chamber. Manually operated / motorized bypass damper in galvanized steel / aluminum / stainless steel construction. Overhead weather proof canopy constructed out of galvanized steel / aluminum stainless steel construction. Thermally insulated totally sealed glass inspection window. Thermal break on panels and frame work. Weather proof marine light. Any others special feature as requested by the customer.
Offering horizontal laminar air flow size : 3' x 2':-
We offer ss 304 construction of horizontal laminar air flow (hlaf) with hepa filter 0.3 micron & pre-filter with 10 micron having suitable motor & blower assemblies with differential pressure magnetic gauge with feather touch on off switches.
Offering Air Handling Unit:
Double skin 25 mm thick puff panel with did backward blower - motor assemblies & 5 tr cooling coil having suitable pre filter 7 Microwave filters.
Capacity - 2200 cfm Sp - 100mm - Qty -1 no